The COMBI+UNICA is ideal for a wide range of folding and gluing. Quality and speed of set up and production are assured by several key factors. Some products are.

· Presentation folders of many kinds · Special envelopes · CO/DVD wallets with 1 or 2 pockets · CD/DVD wallets from 1 to 4 reinforced panels · Photograph frames · Photograph pockets with two compartments · Book covers with flaps, flexible book covers · Office files and medical case note files · Simple inline boxes and tent cards

Automatic edge gilding machine is specially design for Bible, Koran and diaries.

State of art automatic Edge gilding machine is similar to any elliptical perfect binding machine with four clamps. Books are held tightly with bottom and side register in clamp with a simple quick clamp. Grinding stations has three stages with coarse fine and finer grades. Book block finally de-dusted and polished with pneumatic jets.

Gilding foil is transferred to block edge with controlled temperature and pressure. No chemical or liquid is used in gilding process resulting in non sticky gilding. Books are released in hopper gently after gilding.

Mirror finished and non sticky gilding is achieved by continuous rotation at high speed gilding.

Window-Pasting Machine For Profile Paper Boxes P-500

The emergency of the Window-Pasting Machine For Profile Paper Boxes P500 substituted the other ones that cannot paste the windows of profile boxes. This machine sucks paper from its bottom, and then the paper is positioned through the dialing pin, and then automatically glued the paper and paste film. The size of the film can be adjusted at random according to the window size. The paper that has been pasted with film can automatically arrange in an orderly way, automatically seal. It is characterized by ease of debugging and validation, higher production capacity. As a result it is a good product for pasting the paper boxes with profile windows.

Full Auto Paper Box Window Pasting Machine P-750A Type

P-750A Full Automatic case window Pasting Machine can sealing glue on all kind of case window, and process it. Accurate fixed position automatic increment glue transmission position, and Automatic calculation the numerical convenience adjust the efficiency is high. It's a nice machine to do the case window.

Auto Envelope Window Film Pasting Machine P-120A Type

P-120A is expert at laminating and pasting all kinds of envelop window Suction to draw paper from the bottom and no stop to feed paper, Blowing air to detach paper by is stable and reliable and it is forced to orient. The roller automatically applies glue so as to ensure the even applied glue. Adopt the step less speed change to regulate the length of film so as to be convenient and safe.

Features:

Self developed brand new L-typed sealing machines which is specially designed for larger products. Suitable for all brands of shrink films. It always the products to wrap.
Excellent sealing because of the vertical operation can solve the film folding problem during sealing action. It can be overcome the sealing line with wrinkle effect found from other L-type sealing machines.
According to the product height, the sealing frame height and sealing stroke can modified. Highly increase the packaging capacity.

In continuous motion machines, instead sealing bar keeps on moving, not only vertically but also horizontally, following the products and avoiding start-stop produced by intermittent fix bar.

In order to reach always higher speed and increase customer's possibilities, we can offer the machine not only with pneumatic closure of sealing bar (standard one) but also in a version with motorized sealing bar or and servo motors.

This kind of machine is having a very good response from the market especially in graphic field, where speed,saving of film, beautiful and tight packaging are the most requested features, and this model is the perfect solution.

 

Intermittent Motion Type (PP 500)

They can work with all types of films (optional blades for polyolefin, polyetilene, polypropylene).
The 3-belt machine allows to save a lot of film.
The length of the item to be packaged is calculated automatically by the machine.
Whenever an item is missing, the cycle is automatically stopped

 

Vertical L Bar Shrink Wrapper (PL-802)

Vertical L-bar sealer seal frame using 4pillars vertical operate. It can make the whole sealing system stable, durable and apply an even pressure on shrink films to provide excellint sealing effect.

Features:

Self developed brand new L-typed sealing machines which is specially designed for larger products. Suitable for all brands of shrink films. It always the products to wrap
Excellent sealing because of the vertical operation can solve the film folding problem during sealing action. It can be overcome the sealing line with wrinkle effect found from other L-type sealing machines.
According to the product height, the sealing frame height and sealing stroke can modified. Highly increase the packaging capacity

 

Automatic L-Bar Sealer

This is an Automatic, durable arid easy to operate automatic scaling machine. Widely adopted by the toys, cosmetic, tools, foods, stationary, daily-use products, electrical applakes and similar at industries etc for packing purpose.

 

Features:

PLC control system is employed to control every movement of the machine. Machine is perfect designed with safety protector and alarms. Our constant heat solid knife sealing systems is excellent for consistent seals without buildup. It is convenient to maintain and easy to operate.
The film-jiiding system is perfectly manipulated by special designed electric eyes and control timer to adjust the length of shrink film automatically.
The added horizontal and vertical electric eyes provide alternative setting for packing system. This offers PL-728 to pack a variety of products in different size.

Hydraulic Die Cutting Machine P-470 Type

P-470 type large platform hydraulic module cutter is acutling equipment developed for moulding envelope paper, suitable to processing and module cutting for paper sheet, cardboard, plastic film, leather, etc. The prominent features is of convenient adjusting, simple operating, which is applicable to mass production or little batch of various kinds. Spacious working platform, strong cutting pressure, four-dimensional foot type steady structure, prompt lift controlling and automatic material-return of high efficiency and labor saving.

 

Hydraulic Die Cutting Machine P-470 Type

The "Saetta" machine is designed specifically for making envelopes from 80 to 200 gms, plus with the addition of the Mohandes friction feeder it is possible to feed cardboard from 200 gms to 400 gms to make "courier" style envelopes and presentation folders. The "Saetta" machine is able to feed ram punched un-scored envelope blanks though a rotary continuous feeder. The machine cross scores top and bottom creases with an electronically controlled knife, and creases the flaps with a rotary system. The "Saetta" creases, folds and glues the envelope then turns it through 90° using a "rotary conical device", then it applies pressure sensitive adhesive and protective silicon tape to the envelope flap. Delivery is into a rotary collector.

A front edge trimming machine for books and magazines with lateral flap book covers

The ELETTA front edge trimming machine is positioned inline on the binding line, before the three edge trimmer The book cover is opened horizontally by way of suction cups, placing it in the trimming position, allowing the front edge of the book block to be trimmed using the cutting blade. The cutting blade has an oblique scissor movement and levelling bar Due to the semplicity of the machine a wide variety of work can be undertaken, ie stitched and milled volumes, magazines, etc.

P 6050 A up down animate carton sealer:-

5050 side drive belts:-

P 5050S Auto uniform flap closing carton sealer:-

5050E Fully automatic side belts driven sealer:-

P-5050 A Auto uniform flap closing carton sealer:-

P 5050 B Auto uniform flap closing caton sealer:-

P-5050, Corner-type full automatic carton sealing machine

Feature

This set is a foursquare one-unit series. It can be combined with other "-" -shaped taping machine to operate (I-shaped automatically carton sealing).
Transmission design, operate by upper and lower transmission box affixed with sealed carton.
Within carton specification, normalize the same carton based on the same packing sheet, finish by manual adjustment for specification change Oust 1 minute for adjustment)
On-line process adopt L type forward push steering.
Machine parts are precise and durable, with long operating life.
Guarantee more artificial stickers with beauty, fast speed, high efficiency.

P-5050A, Corner-type full automatic carton sealing machine

Feature

This set is a foursquare one-unit series. It can be combined with other "-" -shaped taping machine to operate (I-shaped automatically carton sealing).
Transmission design, operate by upper and lower transmission box affixed with sealed carton.
Within carton specification, normalize the same carton based on the same packing sheet, finish by manual adjustment for specification change Oust 1 minute for adjustment)
On-line process adopt L type forward push steering.
Machine parts are precise and durable, with long operating life.
Guarantee more artificial stickers with be~uty, fast speed, high efficiency.

P-400, CF-40T Carton forming machine

Feature

The Matrix series, carton forming back to the main functions.
Slip plate storage, vertical storage can be used at any time to add Cardboard plate (not stands fill boxes). Carton applicable specifications, at the same time As the same size carton packaging use, and if necessary transform carton Specifications, adjustments to use (adjusted time required only 2 to 3 minutes).
The series used to rationalize designed to simultaneously draw in shape, With the pack into the back end of a complete synchronization.
Mechnical precision durable performance, vibration-free operations and Long life operation of a solid.
Was lightweight, mobile high-performance, high-speed, high efficiency.

     Product Range

    1.  Roller conveyors

    2.  Slat conveyors

    3.  Belt conveyors

4.  Twin chai pallet conveyors

5.  Over head conveyors

6.  Aluminum profile conveyors

         7.  Scissor lift

         8.  Vaccume gripping system

         9.  Turn table

         10.  High speed goods lift

 

Roller Conveyors

Type: Live roller idler roller friction cluthc roller.

Capacity:Up to 5 ton/meters.

Applications: Material transfer,assembli lines,packeging lines,storage and retrieval systems,online weinging systems.

 

Slat Conveyors

Type: Steel Slat,Flexi,Stop & Go,Pallet accumulation

Capacity:Widthsup to 49 Inches,Loads up to 3 ton/mtr.

Applications:Material transfer,assembli lines,machine shop gantry feeding.

 

Belt Conveyors

Type: Belt of various grades & attachment(eg Cleated),MS/AL,Inclined.

Capacity:Widthsup to 2 mtr,Speed up to 40 mtr/min.

Applications:Material transfer,incspection,packaging lines,online weighing.

 

Overhead Conveyors

Type:3 Wheel trolly,Bi-planer chain.

Capacity:up to 100 kg/m.

Applications:Paint shops,Powder coating unit,Materials supply chain & all types of over head material transfer.

Buffer Conveyors

 

Unloading Conveyors

Length-5m two modules.
Accumulates the roll segments before packing station.
Electrically programmed,maintains gap between rolls.
Formed chassis,PU painted.
UHNWPE wear strip to guide pallets.

Length-3m.
Strapping along with wooden planks
Roll is unloaded from this station and goes to shiooing.

Nl 1 Type Light Cut-in Composite Racking:

All-purpose angle steel structure, steel panel or wooden floor can be assembled freely; the height of each layer can be adjusted freely every 50mm pitch, the

 

Nm2 Medium Type Midi Racking:

The height of each shelf can be adjusted freely; It is easy and efficient to handle material by complementing a wide variety of forklift trucks or passage stackers; loading capacity of each layer may reach 5000 kg; it is the most widely used raking in every walk of life.

Nh Heavy Type Pallet Racking System:

The height of each shelf can be adjusted freely; It is easy and efficient to handle material by complementing a wide variety of forklift trucks or passage stackers; loading capacity of each layer may reach 5000 kg; it is the most widely used raking in every walk of life.

 

Drive. In Racking:

Forklifts may enter the inside loading corridors of Drive-in Racking to handle goods; it's designed for storage of a few kinds of goods with large quantities for each kind; excellent use of available space.

 

AS/RS System:

The AS/RS System consists of assembly racking and welding racking. Complemented by passage stackers, conveyance system and computer control system, it guarantees the fullest space utilization, handling mechanization and storage management modernization.